ROFU 8112FF Series Full Length Locking Magnetic Door Lock

ROFU 8122-002 US28

ROFU 8112FF Series FULL LENGTH LOCK HOUSING MODELS have attractive, heavy duty anodized extruded aluminum housing. Equipped with a baseboard and a security cover. Based on sizes of the doors or the opening range, you may trim at your own discretion. 

ROFU 8112FF-2-BD-RD  US28 Full Length Two Point Locking Magnetic Door Lock (This replaces the 8122-002)

It is used mainly in medical facilities and schools.  The unit mounts on the side of the jamb, and the armature plates mount on the side of the door (top and bottom) it will protect the door from being damaged (bent out) if the door is kicked.  Usually it is used with a ROFU 9112D transformer, and ROFU 9600-US28 mushroom button.

  • Holding Force: 1200lbs x 2
  • 12/24 VDC (adjustable by moving jumpers over the 4 pins on the PC Board)
  • ROFU 8112FF Series Instructions
  • Specifications:  450 mA @ 12vdc / 225 mA @ 24vdc (twice)
  • Length: 45″ for 8112FF-BD-RD, 96″ for 8112FF-2-BD-RD
  • Dimensions: 96″ x 2 5/8″ x 1 5/8″
  • Armature Plates (each) : 7 1/4″ x 2 3/8″ x 5/8″
  • Fail Safe: Releases instantly when power is disconnected
  • Fail Alarm: May be released upon activation of fire alarm
  • No residual magnetism
  • Bond Sensor (B): Built in hall effect crystal affected by door position, voltage input and magnetic field strength
  • Relock Time Delay (RD): Timer is adjustable 1~80 seconds
  • LED: Bi-Colored Red/Green
  • Door Status (D) is attached to magnet housing which works with Bond Sensor
  • Housing: Attractive, heavy duty anodized extruded aluminum housing
  • Mounting Hardware included with each unit
  • Limited Lifetime Warranty on the Magnetic Block and a 18 Month Warranty on the PC Board. 

 

 

 

 

Also available on ROFU 8112FF-BD-RD  US28 Single Magnet Lock8112FF

 

ROFU 8112FF-BD-RD  US28

  • Holding Force: 1200lbs
  • 12/24 VDC (adjustable by moving jumpers over the 4 pins on the PC Board)
  • ROFU 8112FF Series Instructions
  • Specifications: 450 mA @ 12vdc / 225 mA @ 24vdc
  • Length: 45″ for 8112FF-BD-RD, 96″ for 8112FF-2-BD-RD
  • Dimensions: 45″ x 2 5/8″ x 1 5/8″
  • Armature Plates (each) : 7 1/4″ x 2 3/8″ x 5/8″
  • Fail Safe: Releases instantly when power is disconnected
  • Fail Alarm: May be released upon activation of fire alarm
  • No residual magnetism
  • Bond Sensor (B): Built in hall effect crystal affected by door position, voltage input and magnetic field strength
  • Relock Time Delay (RD): Timer is adjustable 1~80 seconds
  • LED: Bi-Colored Red/Green
  • Door Status (D) is attached to magnet housing which works with Bond Sensor
  • Housing: Attractive, heavy duty anodized extruded aluminum housing
  • Mounting Hardware included with each unit
  • Limited Lifetime Warranty on the Magnetic Block and a 18 Month Warranty on the PC Board.