ROFU 8011-002 Single Door Double Monitored Magnetic Door Lock

8011-002 US28

rofu-2014-582 copy

8011-002 US40

ROFU 8011-002 US28 or US40 Double Monitored Single Door Magnet

  • Holding Force: 1200lbs
  • 12/24 vdc (adjustable by moving jumpers over the 4 pins on the PC Board) ROFU 8011 WIRING DIAGRAM
  • Specifications:  415 mA @ 12vdc / 215 mA @ 24vdc
  • Dimensions: Magnet: 10 1/2″ x 2 5/8″ x 1 5/8″ Armature Plate: 7 1/4″ x 2 3/8″ x 5/8″
  • Fail Safe: Releases instantly when power is disconnected
  • Fail Alarm: May be released upon activation of fire alarm
  • No residual magnetism
  • Bond Sensor: Built in hall effect crystal affected by door position, voltage input and magnetic field strength
  • Door Status: Reed switch imbedded into the magnetic block works with a permanent magnet in the armature plate to provide true secondary door status.  This DS is not fed through the PCB and does not require power to send the door status
  • LED: Bi-Colored Red/Green door status is attached to magnet housing which works with Bond Sensor (see below photos)
  • Available in US28 or US40
  • Housing: Attractive, heavy duty anodized extruded aluminum housing, no need for a cover
  • Mounting Hardware included with each unit, for out-swinging doors
  • Optional brackets required for in-swinging doors and special installations can be found in accessories.
  • Click here for: UL Listing for USA Click here for: UL Listing for Canada
  • (Auxiliary Locking and UL10C)
  • Limited Lifetime Warranty on the Magnetic Block and a 18 Month Warranty on the PC Board. 

Optional Features/Accessories:

Model 8011-002-TD (re-lock time delay) is available at an additional cost. (This unit has the Bond Sensor, but not the Door Status)

Stainless Steel Mounting Bracket, Z-brackets, filler plates, spacers, and accessories can be found in the accessories section
For Replacement Parts
8011-2

(1) ROFU Magnet 8011-002 with bond sensor. (2) Armature Plate (3) DC power supply (4) Access Controls – key switch (5) Request to exit button (6) Remote release

8011-1

(L) Standard Out-swinging Door (R) In-Swinging Door with # 21031 Z Bracket

When the bond sensor recognizes an issue (power drop, not locked etc.) the green light changes to red.

When the bond sensor recognizes an issue (power drop, not a full bond, not locked etc.) the green light changes to red.

When the bond sensor recognizes all is well, the light changes to green to let you know that.

When the bond sensor recognizes all is well, the light changes to green to let you know that.