ROFU 8005 Mini Magnet Series

ROFU 8005 US28 ds


ROFU 8005 US40 ds

The ROFU 8005 Series Magnetic Locks

The 8005 has the Bond Sensor and the Bi-Colored LED as a standard feature as well as a secondary reed switch that works with a permanent magnet that is installed in the armature plate (they need to be lined up during installation) thus creating True Door Status.
 
Bond Sensor: Built in hall effect crystal affected by door position, voltage input and magnetic field strength.
True Door Status: Reed switch imbedded into the magnetic block works with a permanent magnet in the armature plate to provide true secondary door status.  This DS is not fed through the PCB and does not require power to send the door status.
  • 650lb 12/24 VDC
  • Specifications:  415 mA @ 12VDC / 215 mA @ 24VDC
  • Dimensions: Magnet: 9 13/16″ x 1 5/8″ x 15/16″ // Armature: 7 1/4″ x 1 1/2″ x 5/8″
  • Fail Safe: Releases instantly when power is disconnected
  • Fail Alarm: May be released upon activation of fire alarm
  • No residual magnetism
  • Bond Sensor: Built in hall effect crystal affected by door position, voltage input and magnetic field strength
  • LED: Bi-Colored Red/Green door status is attached to magnet housing which works with Bond Sensor
  • Housing: Attractive, heavy duty anodized extruded aluminum housing, no need for a cover
  • Mounting Hardware included with each unit, for out-swinging doors
  • Optional brackets required for in-swinging doors and special installations can be found in accessories
  • Available in US28 or US40
  • Click here for: UL Listing for USA  Click here for: UL Listing for Canada (Auxiliary Locking and UL10C)
  • Limited Lifetime Warranty on the Magnetic Block and a 18 Month Warranty on the PC Board
8011-1

(L) Standard Out-swinging Door (R) In-Swinging Door with # 21030 Z Bracket

8011-2

(1) ROFU Magnet 8005 with bond sensor. (2) Armature Plate (3) DC power supply (4) Access Controls – key switch (5) Request to exit button (6) Remote release

When the bond sensor recognizes an issue (power drop, not locked etc.) the green light changes to red.

When the bond sensor recognizes an issue (power drop, not locked etc.) the green light changes to red.

When the bond sensor recognizes all is well, the light changes to green to let you know that.

When the bond sensor recognizes all is well, the light changes to green to let you know that.

Optional Features/Accessories:
mounting brackets, Z-brackets, filler plates, spacers, and accessories can be found in the accessories section.
For Replacement parts